Home > Mirrors > Angle Frame >

Bobrick B-2908 1830, 18" x 30" Angle/Welded Framed Mirror with Tempered Glass
Bobrick B-2908 18 x 30 Mirror image
Standard Non Tempered B-290 Series Shown
 
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $267.00
Our Price: $153.53
Savings: $113.47
Manufacturer: Bobrick
Country of Origin: USA
Availability: Usually Ships within 2-3 Business Days


Product Code: B-2908 1830
Qty:

Description Technical Specs A Note from the Manufacturer
 
Bobrick B-2908 1830, 18" W x 30" H (44 x 75cm) Satin Finish Angle/Welded Framed Mirror with Tempered Glass and Theft Resistant Mtg
Construction
Fabricated of 18-8, type 304, heavy gauge stainless steel, 3/4" x 3/4" (19 x 19mm) angle with vertical grain satin finish. One piece, roll formed construction forms continuous stiffener on all sides. Bevel design on front of angle holds frame tightly against mirror. Corners of mirror frame are welded, ground, and polished smooth. Galvanized steel back is fastened to frame with concealed screws and equipped with integral horizontal hanging brackets.

Mirror glazing is No. 1 quality, 1/4" (6.4mm) thick tempered select float glass, selected for silvering, electrolytically copper-plated by the galvanic process. It is warranted against silver spoilage for 15 years. The back is protected by full size, shock absorbing, water resistant, nonabrasive, polyethylene padding.

The exposed frame surfaces have a satin finish.

Installation
Mount wall hanger on wall with screws (not furnished) at points indicated by an S. For plaster or dry wall construction, provide backing to comply with local building codes, then secure wall hanger with screws (not furnished). When providing a concealed backing, allow backing to cover minimum range of mounting hole locations shown on drawing. For other wall surfaces, provide fiber plugs or expansion shields for use with screws (not furnished), or provide 1/8" (3mm) toggle bolts or expansion bolts.

Snap Locking Design: Hang mirror on wall hanger with all four backplate louvers engaged behind horizontal wall hanger members. To do this, mirror must be centered in front of the wall hanger horizontally, pressed flat against the wall approximately 1" (25mm) above final position and then lowered into final position.

"2S" Tab Design: Comprises of two brackets, while the bottom one is furnished with double side tape. Bottom hanger bracket's mounting holes must be 1" - 1 1/2" above mirror's bottom edge. Note: Bottom hanger bracket is not supposed to engage with louvers of mirror's backplate. Hang mirror on wall top hanger bracket with the top two louvers engaged behind top wall hanger bracket. To do this, mirror must be centered in front of the wall hanger horizontally, pressed only at the top against the wall approx. 1" (25mm) above final position an then lowered into final position. When lowering, pull mirror's bottom edge off the wall by preventing bottom bracket from engaging. Once lowered, mirror must be pressed against wall to engage with double sided tape of lower wall hangar bracket.

Snap Locking Design — Locking devices automatically secure mirror to concealed wall hanger when it is lowered into final position. Locking devices may be unlocked by inserting two flat blade screwdrivers behind each side of mirror near the bottom or under the bottom of the mirror and pulling mirror bottom forward and then up.

"2S" Tab Design — Double-sided tape secures mirror to concealed wall hanger by pressing mirror against double sided tape of lower hanger once it is lowered into final position.

For compliance with ADA Accessibility Guidelines install unit with bottom edge of reflecting surface no higher than 40" (1016mm) maximum above finished floor. Note: Consult local and national accessibility codes for proper installation guides. Code compliance is the responsibility of the installer.

Warranty
Fifteen (15) Year Manufacturer's Warranty - Warranted against silver spoilage under normal indoor atmospheric conditions from date of sale.

Share your knowledge of this product. Be the first to write a review »